PN Type Package Designator Pb-Free Packages - Manufacturing Conversion Datecode, Refer to Note 1 Type of Plating / Finish Matte Tin Annealing Process Minimum Plating Thickness Does this Microchip Pb-free device meet RoHS compliance for the following 6 materials: Pb, Hg, Cr6+, Cd, and PBB / PBDE Total Mass (g) STANDARD8L PDIP .300in0508Matte Tin150C / 1hr w/l 24 hours400 microinchesYes0.4867
TC1413CPA |
RFQ for TC1413CPA |
![]() |
| Technical/Catalog Information | TC1413CPA |
| Vendor | Microchip Technology |
| Category | Integrated Circuits (ICs) |
| Configuration | Low-Side |
| Voltage - Supply | 4.5 V ~ 16 V |
| Current - Peak | 3A |
| Delay Time | 35ns |
| Package / Case | 8-DIP (300 mil) |
| Packaging | Tube |
| Number of Outputs | 1 |
| Input Type | Inverting |
| Number of Configurations | 1 |
| Operating Temperature | 0°C ~ 70°C |
| High Side Voltage - Max (Bootstrap) | - |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | TC1413CPA TC1413CPA |
| Product | Manufacturers | Pack | D/C | ||||||||
| TC1413CPA | - | - | 08+PBF |
The TC1413/1413N are 3A CMOS buffer/drivers. They will not latch up under any conditions within their power and voltage ratings. They are not subject to damage when up to 5V of noise spiking of either polarity that occurs on the ground pin. They can accept, without damage or logic upset, up to 500 mA of current of either polarity being forced back into their output. All terminals are fully protected against upto 4 kV of electrostatic discharge.
As MOSFET drivers, the TC1413/1413N can easily switch 1800pF gate capacitance in 20 ns with matched rise and fall times, and provide low enough impedance in both the ON and the OFF states to ensure the MOSFET's intended state will not be affected, even by large transients. The rise and fall time edges are matched to allow driving short-duration inputs with greater output accuracy.
Features |
| Latch-Up Protected: Will Withstand 500mA Reverse CurrentInput Will Withstand Negative Inputs Up to 5VESD Protected .....................................................4kVHigh Peak Output Current .................................. 3AWide Operating Range .......................... 4.5V to 16VHigh Capacitive Load Drive Capability ........................... 180 pF in 20nsecShort Delay Time .................................. 35nsec TypConsistent Delay Times With Changes in Supply VoltageMatched Delay TimesLow Supply Current - With Logic "1" Input ................................... 50A - With Logic "0" Input ................................. 150ALow Output Impedance .................................... 2.7Pinout Same as TC1410/11/12 |